JP gave me a Raspberry Pi Version B with 512MB RAM.<\/p>\n
http:\/\/www.raspberrypi.org\/<\/a><\/p>\n Quick Start Guide: http:\/\/www.raspberrypi.org\/wp-content\/uploads\/2012\/04\/quick-start-guide-v2_1.pdf<\/a><\/p>\n Formatting Tool: https:\/\/www.sdcard.org\/downloads\/formatter_4\/<\/a><\/p>\n Images: http:\/\/www.raspberrypi.org\/downloads<\/a><\/p>\n I used “NOOBS (offline and network install)” iamge onto a 8GB SD Card for installation.<\/p>\n 1. Download the SD Formatter 4.0(link above) and install JP gave me a Raspberry Pi Version B with 512MB RAM. http:\/\/www.raspberrypi.org\/ Quick Start Guide: http:\/\/www.raspberrypi.org\/wp-content\/uploads\/2012\/04\/quick-start-guide-v2_1.pdf Formatting Tool: https:\/\/www.sdcard.org\/downloads\/formatter_4\/ Images: http:\/\/www.raspberrypi.org\/downloads I used “NOOBS (offline and network install)” iamge onto a 8GB SD Card for installation. 1. Download the SD … Continue reading
\n2. Insert a SD Card 4GB+
\n3. Run the Formatting Tool
\n3a. Make sure the correct drive is selected
\n3b. Click on the Options and select “FORMAT SIZE ADJUSTMENT”
\n3c. Click OK
\n4. Click the Format button
\n5. Unzip the downloaded NOOBS image(link above)
\n6. Copy unzipped files(all) onto the root of the SD Card
\n7. Insert the SD Card in the SD Card Slot on the Raspberry Pi
\n8. Power up the Raspberry Pi with at least HDMI, USB Keyboard connected<\/p>\nBy default, NOOBS will output over HDMI at your display\u2019s preferred resolution, even if no HDMI display is connected. If you do not see any output on your HDMI display or are using the composite output, press 1, 2, 3 or 4 on your keyboard to select HDMI preferred mode, HDMI safe mode, composite PAL mode or composite NTSC mode respectively.\r\n\r\n1. HDMI\u00a0mode\u00a0\u00ad\u00a0this\u00a0is\u00a0the\u00a0default\u00a0display\u00a0mode.\r\n2. HDMI\u00a0safe\u00a0mode\u00a0\u00ad\u00a0select\u00a0this\u00a0mode\u00a0if\u00a0you\u00a0are\u00a0using\u00a0the\u00a0HDMI\u00a0connector\u00a0and\u00a0cannot\u00a0see anything\u00a0on\u00a0screen\u00a0when\u00a0the\u00a0Pi\u00a0has\u00a0booted.\r\n3. Composite\u00a0PAL\u00a0mode\u00a0\u00ad\u00a0select\u00a0either\u00a0this\u00a0mode\u00a0or\u00a0composite\u00a0NTSC\u00a0mode\u00a0if\u00a0you\u00a0are\u00a0using the\u00a0composite\u00a0RCA\u00a0video\u00a0connector\r\n4. Composite\u00a0NTSC\u00a0mode<\/pre>\n","protected":false},"excerpt":{"rendered":"